I,  What is magnetic material? We know that most switching power supply transformers are used ferrite cores, the ferrite is a ceramic ferromagnetic material, it is a crystal compos...

I, Switching power supply transformer definition The switching power supply transformer refers adding witching tube to the power transformer. In the circuit, the switching power supply transformer has...

We can see magnetic materials everywhere in our life. Sometimes you may not know what it is when you meet it. Like Fe3O4 in our life, rust can be seen everywhere in our life, but you do not know that ...

I , Working Principle of Current and Voltage Sensor Current and voltage sensor is an electrical measurement sensor that converts a large current into a small voltage or current signal by Hall eff...

Current and voltage sensor is a kind of detection device, which can sense the information of the measured current, and transform the detected information into electrical signal that meets the requirem...

High-frequency transformers are widely used in the modern industry, especially in recent years, high-frequency transformer has developed rapidly. What direction is it going to develop? At pr...

I: Two types common switching power supplies High frequency-switching mode power supply is a high efficency and high robust power mode. Among communications and electronic devices, HF-SMPS mainly used...

I. Common mode inductor and differential mode inductor Common mode inductors and differential mode inductors are one of the effective components for anti-electromagnetic interference. They are widely ...

I. Introduction to Product Foundation Saturated magnetic induction (B s): 11 000 Gs - 12 500 Gs (1.1T - 1.25T) Residual magnetic induction (B s): below 600 Gs (below 60 m T) - Coerciveness: below 0.4 ...

As we talked in the previous article "A New Type of Iron-based Amorphous Ultramicrystalline Magnetic Core", the product examples: CT076 (product coding) (electronic components in the transformation of...