blog categories
recent posts
I. Introduction to Product Foundation Saturated magnetic induction (B s): 11 000 Gs - 12 500 Gs (1.1T - 1.25T) Residual magnetic induction (B s): below 600 Gs (below 60 m T) - Coerciveness: below 0.4 ...
As we talked in the previous article "A New Type of Iron-based Amorphous Ultramicrystalline Magnetic Core", the product examples: CT076 (product coding) (electronic components in the transformation of...
The transformer is essential component of the switching power supply. The commonly used magnetic cores of transformers are EE type cores, RM type cores, PQ type cores and EP type magnetic cores. How d...
Toroidal transformer is a large type of electronic transformer, which is widely used in home appliances and other electronic equipment with high technical requirements. Its main use is as a power tran...
The ferrite core is composed of iron oxide (Fe2O3) and one or more other metals (such as manganese, zinc, nickel, magnesium) oxides or carbonate compounds. Ferrite raw materials are pressed, and then ...
Relay is an automatic switching component with isolation feature. It is widely used in remote control, telemetry, communication, automatic control, mechatronics and power electronic equipment. It is o...
High frequency transformer is an important part of the isolated switching power supply, and the design of the high-frequency transformer is also a key technology of the switching power supply. In the ...
EE/EF/EEL Core Features 1)With large winding area, it’s convenient to winding and wiring. 2)Wide application range, high working frequency, wide working voltage range, high output power and good therm...
Iron powder core, namely magnetic material ferric oxide, is mainly used for high frequency inductor to solve electromagnetic compatibility (EMC) problems in electrical circuits. We supply various seri...
The high frequency transformer operates at a frequency higher than the intermediate frequency (10kHz), power transformer is mainly used as high-frequency switching power transformer in high-frequency ...
How to ensure the working conditions of instrument transformer. 1.The instrument transformer must be installed at an altitude of not more than 1000m; 2.The humidity of the surrounding air shall not ex...
The working frequency of high frequency inverter power supply in 20 kHz ~ 50 kHz, as the heart's main power supply transformer, the traditional ferrite core material, though a very low loss at high fr...
The excellent characteristics of amorphous nanocrystalline soft magnetic materials make it suitable for high-power medium and high frequency transformers, high-frequency switching power supplies, elec...
Amorphous and nanocrystalline have high magnetic permeability and saturation magnetic flux density, and have good soft magnetic properties within a certain frequency range. Due to its excellent charac...
The electromagnetic voltage transformer is the voltage of the primary side, so it will not be affected by the load of the secondary side of the voltage transformer. In most cases, the load of the seco...