blog categories
recent posts
blog tags
The ETD29 transformer horizontal bobbin fits ETD29‑16‑10 ferrite core. It is made of red PA66 nylon with glass‑fiber. Pin pitch is 2.54 mm, square pin size 0.6×0.6 mm. It supports direct PCB soldering and automatic winding. It is widely used for medium‑low power high frequency SMPS transformers, and is a common choice to replace bakelite bobbin for mass production.
This bobbin has 10 pins on each side. PCB mounting row pitch is 25.40 mm. Winding window width is 19.00 mm. Central hole Φ10.2 mm matches the core center post. Nylon material is tough and pins are not easy to break under impact. But nylon absorbs moisture, so storage and soldering processes need proper control. All dimensions are standard for automatic winding machines. It works for multi‑output transformers such as industrial power supplies and on‑board power supplies.
For specifications and real‑world use: total body length 34.60 mm, total height 34.70 mm. Pin stand‑off height below PCB is 4.00 mm. Built‑in clips hold ferrite core for stable assembly. Compared with traditional bakelite bobbin, red nylon resists shock, has fewer damages during transport and assembly, and keeps steady dimensions. Operating temperature: ‑40℃~120℃. Short‑time wave‑soldering tolerance up to 260℃. Keep parts sealed and dry in storage, to avoid plastic bubbles during soldering. It fits tens‑watt power supplies and DC-DC power module transformer. Full purchasing description: Bobbin, ETD29 Horizontal,10+10Pin,Pin pitch 2.54mm,Material:NYLON RED(PA66‑GF V‑0),Pin:SQ0.60. Use together with ETD29 ferrite core and core clip.
If you need matched ETD29 core or final transformer, weclome to contact us:
Email: sales008@mycoiltech.com
Name:Alex~Mycoiltech