Left banner
new products
  • 8+8 pin EE65 transformer Bobbin
    EE65 High Power Transformer Horizontal Frame

    EE65 single phase transformer. Horizontal EE65 bobbin 8+8 pins. Bobbin Size=51.5mmX43.7mmX54.8mm. Parallel Distance=44.5mm. Pin pitch=5.0mm. Good quality EE65 encapsulated transformer, singled packed with carton.

  • 6+6 Pins EF30 Vertical Bobbin
    EF30 Power Transformer Vertical Bobbin 6+6 Pin

    EF30 rectifier transformer. 6+6 pins vertical EF30 coil former. Bobbin Size=35.3mmX19.0mmX34.8mm. Pin pitch=5.08mm. Parallel Distance=15.24mm. SMPS transformer has small size, high power and low cost, we design and manufacture high frequency transformer.

  • PQ50 Electronic Transformer Bobbin
    PQ50 Vertical High Frequency Transformer 6+6 Pin Bobbin

    6+6 pins PQ50 coil former. PQ phenolic material bobbin. Bobbin Seize=51.5mmX50.8mmX51.5mm. Parallel Distance=45.65mm. PQ50 Vertical bobbin for power transformer. Make bobbin tooling.

  • Electronic Impedance Matching and Maximum Power Transformers
    High Frequency Matching Transformer for Switching Power Supplies

    High Frequency Electronic Matching Transformers are intended for measuring electric signal voltages or currents which contain useful data. They match the signal source with the load ensuring the minimum signal distortion. Along with active components (such as transistors and lamps) they are included into devices amplifying electric oscillations that work within a wide frequency band.

An inductor, also called a coil or reactor, is a passive electronic component that stores energy in the form of a magnetic field, the simplest inductor consists of a wire loop or coi. The inductance is directly proportional to the number ofturns in the coil. Inductance also depends on the radius of the coil and on the type of material around which the coil is wound.

  • Common Mode Choke
    Common Mode Choke
    Common mode chokes mainly for filter common mode electromagnetic interference (EMI) currents, without de-rating under high currents and without causing signal degradation. We offer various series common mode choke, such as UU/UF series, encapsulated series,ET/UT series,current-compensated frame core double chokes and SMD toroidal choke 1-5A.
  • Drum Core Inductor
    Drum Core Inductor
    High power drum core inductors are superior to be high saturation for surface mouting. Mainly used inl VCR, OA equipment, digital cameras, LCD TVs, notebook computers, small communications equipment, DC / DC transformer power supply.
  • Rod Core Inductor
    Rod Core Inductor
    Rod core inductor mainly used in switching power supply DC filter: In the magnetic flux path of the rod core inductor, it need to go through a long air section, the air magnetoresistance is very big, the energy concentrates here, and the air magnetic circuit will not be saturated.
  • Dimmer Choke for EMI Suppression
    Dimmer Choke for EMI Suppression
    Dimmer choke mainly for EMI suppression, has high power, high impedance and low loss,high conversion efficiency, it's easy to insert into PCB, we acceept custom designs.
  • Large Current Inductor
    Large Current Inductor
    Large current coil inductor can work in the range of -55℃ + 120℃ to work properly. We use Mn-Zn material to make large current. Mainly used in DC converters, current transformers, UPS, switching power supply, computers and ther electronic equipments.
  • Three/Four Phase Common Mode Choke
    Three/Four Phase Common Mode Choke
    Three or four phase common mode choke inductors mainly for NC machines, computers, switching power sources, VCR, TVs, peripheral units and measuring instruments. Three/Four phase common mode choke has high power, high current, high efficiency and low power loss.
  • Air Coil Inductor
    Air Coil Inductor
    Air coil inductor has enameled types and self-bonded types, it has wide inductance range and good for high-frequency applications. Single or multi-layered coils also available. We accept custom design.
contact us now
Leave a message