blog categories
recent posts
blog tags
What is magnetic core? Why use it? In wound components the magnetic core plays a vital role in raising the level of magnetic flux produced by a given current flow in the windings. That is to say, it i...
Choose Magnetic Toroidal Ferrite Core The common ring that we normally see on one or both ends of the power line or signal line of the electronic device is the common mode choke. The common mode choke...
Power Factor Correction(PFC) chokes with power ferrite core consist of one or two coils, has small magnetic leakage, low wastage and low profile. PFC chokes mainly used for high frequency po...
Common mode inductor content Common mode choke inductor is essentially a two-way filter: on the one hand to remove common mode line electromagnetic interference signal, the other is to suppress itself...
When we manufacture high frequency transformers, we often find that there is some noise, squeak, buzz and other bad noise from transformers. According to our production experience, we summed up follow...
Air coils can be used as current transformers, with the features of wide frequency band, small size, light weight. It's convenient for digital measurement and protection of microcomputers. I...
High-frequency transformers are widely used in the modern industry, especially in recent years, high-frequency transformer has developed rapidly. What direction is it going to develop? At pr...
I. Common mode inductor and differential mode inductor Common mode inductors and differential mode inductors are one of the effective components for anti-electromagnetic interference. They are widely ...
I. Introduction to Product Foundation Saturated magnetic induction (B s): 11 000 Gs - 12 500 Gs (1.1T - 1.25T) Residual magnetic induction (B s): below 600 Gs (below 60 m T) - Coerciveness: below 0.4 ...
As we talked in the previous article "A New Type of Iron-based Amorphous Ultramicrystalline Magnetic Core", the product examples: CT076 (product coding) (electronic components in the transformation of...
The ferrite core is composed of iron oxide (Fe2O3) and one or more other metals (such as manganese, zinc, nickel, magnesium) oxides or carbonate compounds. Ferrite raw materials are pressed, and then ...
Iron powder core, namely magnetic material ferric oxide, is mainly used for high frequency inductor to solve electromagnetic compatibility (EMC) problems in electrical circuits. We supply various seri...
Toroid ferrite magnetic core is a kind of magnetic components widely used in electronic equipment, mainly including NZ ferrite rings and MZ ferrite rings, which can effectively suppress electromagneti...
Amorphous nanocrystalline magnetic core is a composite material composed of amorphous and nanocrystalline states, where amorphous state refers to the absence of long-range ordering in the atomic arran...
Audio electronic transformers are one of the important components in modern electronic equipment, they play an important role in audio signal processing, audio equipment, electronic musical instrument...
When it comes to designing and building electronic circuits, there are a few key components that engineers simply can’t do without. Among these, the inductor stands out as a versatile and essential el...
In the booming electronic information industry, inductors, as vital electronic components, play a crucial role in circuits. As Hefei Mycoiltech Technology Co., Ltd., with over a decade of deep cultiva...
Driven by the global energy transition and the wave of green mobility, the electric vehicle industry is booming at an unprecedented rate. As a key link in the energy supply of electric vehicles, the p...
In the design of transformers, inductors and other electromagnetic components, there is a seemingly tiny but far-reaching detail - the “magnetic core air gap”. This small gap (usually in millimeters o...
In the family of electronic components, although inductors and transformers both belong to magnetoelectric conversion components, their structural compositions have significant differences due to diff...
In the operational system of electronic equipment, inductors, as key passive components, assume crucial responsibilities such as filtering, anti-interference, and current stabilization. Whether it is ...
ER-Type Bobbin:Structure, Application Scenarios and Performance Advantages 1. Structural Features The magnetic core of the ER-type Bobbin is E-shaped, but its appearance is different from that of EF-t...
EE-Type Bobbin 1. Structural Features The ferrite magnetic core of an EE-Type Bobbin is shaped like two symmetrical "E" letters combined, with the width of the central leg usually equal to t...
Ferrite cores are the core components of electronic transformers, and their material selection directly determines the efficiency, volume, and stability of the equipment. As mainstream materials in th...
I.Features High-frequency transformer operating frequency exceeding IF (10kHz) power transformers, high-frequency switching power supply is mainly used for high-frequency switching power supply transf...
In today's era of rapid technological advancement, efficiency and reliability have become core requirements for electronic devices. Whether it's cutting edge electronics, power supplies, or communicat...
In power supply circuits, transformers and inductors look similar and are often confused. However, they differ significantly in function, structure, and application. Understanding their differences he...
In high-power drive scenarios, the combination of the PM87 Power supply drive transformer bobbin and high-permeability ferrite core is the core key to ensuring stable and efficient operation of equipm...
An electronic component penetrating life and industry. When it comes to hollow coils, many people may feel unfamiliar. However, as a core electronic component with no magnetic core, low loss, and high...
Electronic transformers act as the core energy control component, mainly for voltage conversion, electrical isolation and power transmission. They are widely applied from portable digital products to ...