Power Factor Correction(PFC) chokes with power ferrite core consist of one or two coils, has small magnetic leakage, low wastage and low profile. PFC chokes mainly used for high frequency po...

Common mode inductor content Common mode choke inductor is essentially a two-way filter: on the one hand to remove common mode line electromagnetic interference signal, the other is to suppress itself...

When we manufacture high frequency transformers, we often find that there is some noise, squeak, buzz and other bad noise from transformers. According to our production experience, we summed up follow...

I. Common mode inductor and differential mode inductor Common mode inductors and differential mode inductors are one of the effective components for anti-electromagnetic interference. They are widely ...

The ferrite core is composed of iron oxide (Fe2O3) and one or more other metals (such as manganese, zinc, nickel, magnesium) oxides or carbonate compounds. Ferrite raw materials are pressed, and then ...

Iron powder core, namely magnetic material ferric oxide, is mainly used for high frequency inductor to solve electromagnetic compatibility (EMC) problems in electrical circuits. We supply various seri...

The working frequency of high frequency inverter power supply in 20 kHz ~ 50 kHz, as the heart's main power supply transformer, the traditional ferrite core material, though a very low loss at high fr...

Toroid ferrite magnetic core is a kind of magnetic components widely used in electronic equipment, mainly including NZ ferrite rings and MZ ferrite rings, which can effectively suppress electromagneti...

When it comes to designing and building electronic circuits, there are a few key components that engineers simply can’t do without. Among these, the inductor stands out as a versatile and essential el...

A high frequency transformer is a crucial electrical energy conversion device based on the principle of electromagnetic induction. It transfers energy between primary and secondary coils through high ...

Driven by the global energy transition and the wave of green mobility, the electric vehicle industry is booming at an unprecedented rate. As a key link in the energy supply of electric vehicles, the p...

In an era of accelerating iterations in electronic devices, the stability and adaptability of core components directly determine the performance ceiling of equipment. With over 10 years of technical a...

In the operational system of electronic equipment, inductors, as key passive components, assume crucial responsibilities such as filtering, anti-interference, and current stabilization. Whether it is ...

1. Rod Inductors: "Assistants" in Signal Transmission and Filtering Rod inductors take a ferrite rod as the core, with wires wound around it. The high magnetic permeability of ferrite can enhance the ...

1.EF Type Bobbin (1) Structural Features: The EF type Bobbin is shaped like a combination of the letters "E" and "F", typically featuring three or more pins, which are distributed on one or both sides...

ER-Type Bobbin:Structure, Application Scenarios and Performance Advantages 1. Structural Features The magnetic core of the ER-type Bobbin is E-shaped, but its appearance is different from that of EF-t...

EE-Type Bobbin 1. Structural Features The ferrite magnetic core of an EE-Type Bobbin is shaped like two symmetrical "E" letters combined, with the width of the central leg usually equal to t...