What is magnetic core? Why use it? In wound components the magnetic core plays a vital role in raising the level of magnetic flux produced by a given current flow in the windings. That is to say, it i...

Choose Magnetic Toroidal Ferrite Core The common ring that we normally see on one or both ends of the power line or signal line of the electronic device is the common mode choke. The common mode choke...

A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction. a varying current in one coil of the transformer produces a varyi...

With the increasing reliance on electronic products, the market share electronic components in domestic and foreign markets gradually increased, followed by the demand for various types of industrial ...

Common mode inductor content Common mode choke inductor is essentially a two-way filter: on the one hand to remove common mode line electromagnetic interference signal, the other is to suppress itself...

When we manufacture high frequency transformers, we often find that there is some noise, squeak, buzz and other bad noise from transformers. According to our production experience, we summed up follow...

High frequency transformers for power supply High-frequency transformers are the main components of switching power supplies. There are many topologies in switching power supplies. For example, a half...

I. Common mode inductor and differential mode inductor Common mode inductors and differential mode inductors are one of the effective components for anti-electromagnetic interference. They are widely ...

I. Introduction to Product Foundation Saturated magnetic induction (B s): 11 000 Gs - 12 500 Gs (1.1T - 1.25T) Residual magnetic induction (B s): below 600 Gs (below 60 m T) - Coerciveness: below 0.4 ...

As we talked in the previous article "A New Type of Iron-based Amorphous Ultramicrystalline Magnetic Core", the product examples: CT076 (product coding) (electronic components in the transformation of...

Toroidal transformer is a large type of electronic transformer, which is widely used in home appliances and other electronic equipment with high technical requirements. Its main use is as a power tran...

The ferrite core is composed of iron oxide (Fe2O3) and one or more other metals (such as manganese, zinc, nickel, magnesium) oxides or carbonate compounds. Ferrite raw materials are pressed, and then ...

Relay is an automatic switching component with isolation feature. It is widely used in remote control, telemetry, communication, automatic control, mechatronics and power electronic equipment. It is o...

High frequency transformer is an important part of the isolated switching power supply, and the design of the high-frequency transformer is also a key technology of the switching power supply. In the ...

EE/EF/EEL Core Features 1)With large winding area, it’s convenient to winding and wiring. 2)Wide application range, high working frequency, wide working voltage range, high output power and good therm...

Iron powder core, namely magnetic material ferric oxide, is mainly used for high frequency inductor to solve electromagnetic compatibility (EMC) problems in electrical circuits. We supply various seri...

The high frequency transformer operates at a frequency higher than the intermediate frequency (10kHz), power transformer is mainly used as high-frequency switching power transformer in high-frequency ...

The working frequency of high frequency inverter power supply in 20 kHz ~ 50 kHz, as the heart's main power supply transformer, the traditional ferrite core material, though a very low loss at high fr...

The excellent characteristics of amorphous nanocrystalline soft magnetic materials make it suitable for high-power medium and high frequency transformers, high-frequency switching power supplies, elec...

The electromagnetic voltage transformer is the voltage of the primary side, so it will not be affected by the load of the secondary side of the voltage transformer. In most cases, the load of the seco...

How to classify the different characteristics of voltage transformers? According to the purpose, it is divided into measuring voltage transformers and protection voltage transformers I.The measuring v...

Electric power system of high voltage current transformer is mainly to transform high voltage in the grid signal into low pressure low current signal, not only can be for the monit...

Toroid ferrite magnetic core is a kind of magnetic components widely used in electronic equipment, mainly including NZ ferrite rings and MZ ferrite rings, which can effectively suppress electromagneti...

Amorphous nanocrystalline magnetic core is a composite material composed of amorphous and nanocrystalline states, where amorphous state refers to the absence of long-range ordering in the atomic arran...

When it comes to designing and building electronic circuits, there are a few key components that engineers simply can’t do without. Among these, the inductor stands out as a versatile and essential el...

Plastic bobbins are the main structural component of electronic transformers, mainly providing space for winding copper wires in the transformer, fixing the core in the transformer, and providing path...