What is magnetic core? Why use it? In wound components the magnetic core plays a vital role in raising the level of magnetic flux produced by a given current flow in the windings. That is to say, it i...

Choose Magnetic Toroidal Ferrite Core The common ring that we normally see on one or both ends of the power line or signal line of the electronic device is the common mode choke. The common mode choke...

When we manufacture high frequency transformers, we often find that there is some noise, squeak, buzz and other bad noise from transformers. According to our production experience, we summed up follow...

Air coils can be used as current transformers, with the features of wide frequency band, small size, light weight. It's convenient for digital measurement and protection of microcomputers. I...

We can see magnetic materials everywhere in our life. Sometimes you may not know what it is when you meet it. Like Fe3O4 in our life, rust can be seen everywhere in our life, but you do not know that ...

High-frequency transformers are widely used in the modern industry, especially in recent years, high-frequency transformer has developed rapidly. What direction is it going to develop? At pr...

I. Introduction to Product Foundation Saturated magnetic induction (B s): 11 000 Gs - 12 500 Gs (1.1T - 1.25T) Residual magnetic induction (B s): below 600 Gs (below 60 m T) - Coerciveness: below 0.4 ...

As we talked in the previous article "A New Type of Iron-based Amorphous Ultramicrystalline Magnetic Core", the product examples: CT076 (product coding) (electronic components in the transformation of...

The transformer is essential component of the switching power supply. The commonly used magnetic cores of transformers are EE type cores, RM type cores, PQ type cores and EP type magnetic cores. How d...

The ferrite core is composed of iron oxide (Fe2O3) and one or more other metals (such as manganese, zinc, nickel, magnesium) oxides or carbonate compounds. Ferrite raw materials are pressed, and then ...

High frequency transformer is an important part of the isolated switching power supply, and the design of the high-frequency transformer is also a key technology of the switching power supply. In the ...

EE/EF/EEL Core Features 1)With large winding area, it’s convenient to winding and wiring. 2)Wide application range, high working frequency, wide working voltage range, high output power and good therm...

Iron powder core, namely magnetic material ferric oxide, is mainly used for high frequency inductor to solve electromagnetic compatibility (EMC) problems in electrical circuits. We supply various seri...

The high frequency transformer operates at a frequency higher than the intermediate frequency (10kHz), power transformer is mainly used as high-frequency switching power transformer in high-frequency ...

The working frequency of high frequency inverter power supply in 20 kHz ~ 50 kHz, as the heart's main power supply transformer, the traditional ferrite core material, though a very low loss at high fr...

The excellent characteristics of amorphous nanocrystalline soft magnetic materials make it suitable for high-power medium and high frequency transformers, high-frequency switching power supplies, elec...

Amorphous and nanocrystalline have high magnetic permeability and saturation magnetic flux density, and have good soft magnetic properties within a certain frequency range. Due to its excellent charac...

Toroid ferrite magnetic core is a kind of magnetic components widely used in electronic equipment, mainly including NZ ferrite rings and MZ ferrite rings, which can effectively suppress electromagneti...

Amorphous nanocrystalline magnetic core is a composite material composed of amorphous and nanocrystalline states, where amorphous state refers to the absence of long-range ordering in the atomic arran...

When it comes to designing and building electronic circuits, there are a few key components that engineers simply can’t do without. Among these, the inductor stands out as a versatile and essential el...